Objectives:
- To make an configuration of the hydro material.
- To build a proper hydroelectric prototype.
- To check an suitable approach that can meet the goal of the project.
- Make a configuration based on specification on each material.
- Understand the function of each mechanical items.
- Justify the cost and what component to be used.
- Troubleshoot the prototype in order to determine problem.
- This project did not have a software programming because of the higher cost, and based on the objective project itself.
- In other means, the mechanical material is one of the parts that need to be focusing on during this project.
- The mechanical material must be done properly. It is because, hydroelectric systems is depend on the accurate place, timing and proper design in order to produce a right output.
Objectives:
- To find a suitable mechanical parts.
- To compare the specification of the material.
- To justify the right material that meet the right cost.
- Make a research about items that need to be used.
- Go to Jalan Pasar and Kepong to find the the material.
- Do a component test.
- Make an analyse about hydroelectric operation systems.
- I'm done a few research about operation and simpler systems of hydroelectric in market. Most of it is using the bigger turbine in order to produce a higher electricity.
- So, the comparison between common hydro systems that usually use in village or small hydro has been used as reference.
Objectives:
- To learn about type of turbine used in hydroelectric generator.
- To gain knowledge about turbine efficiency.
- To analyse the turbine behaviour and determine the suitable turbine for proposed systems.
- Get the information from book, video and document.
- Compare the types of turbine.
- Justify the right turbine for proposed systems.
- Try to produce my own customized turbine based on specification given.
- The turbine used to converts the energy in the water into electricity.
- Many types of turbines available, so it is important to match the turbine to the system's condition of water head and flow.
- The Pelton wheel have been chosen as a suitable turbine in proposed systems due a few factors such as performances, reliability and cost.
